HomeDURATOPDURATOP Cubicle System Material & SystemSolid Surface

SUNRAY Acrylic Solid Surface

ssacrylic

SUNRAY Acrylic Solid Surface is a surface coating material that is made from 100% acrylic and fillers.

SUNRAY Acrylic Solid Surface can be used as an alternative artificial ingredients of Granite , marble and natural stone , can be used for surface dining table , kitchen table , sink table , staircase railing , bathroom walls , receptionist desks and counters. Usually used in a Banking , Hospital , Hotel , Restaurant , Public area and Residential .

SUNRAY Acrilyc Solid Surface is safe materials with superb aesthetics . SUNRAY Acrilyc Solid Surface is a result of the development of SUNRAY Solid Surface .

Non Porous
Hygienic because fungus and bacteria cannot grow

Seamless Joint

Homogenous
Can be repolished to look brand new again

Color & Pattern
Pick to match your designs

UV Resistant
Non-yellowing

Thermoformable
Suitable for complex designs

Glossy
More luscious than ever

Physical Properties

Performance and Physical Properties of SUNRAY Solid Surfacing Material

ANSI/NEMA Standards Publication - Ld3 - 1995
Physical Properties	Ld3 Test	SUNRAY
Surface Finish (gloss) - unit	3.2	10
Light Resistance	3.3	NE
Cleanibility - cycles	3.4	NE
Boiling Water Resistance	3.5	NE
High Temperature Resistance	3.6	NE
Impact Resistance (½ lb, ball) in. (226.8g ball) mm	3.8	154 (min.)
Radian Heat Resistance - sec	3.10	600 (min.)
Wear Resistance g/100 rev.	3.13	0.1

ASTM Test Method
Physical Properties	Ld3 Test	SUNRAY Stock Typical Values
Tensile Strength - lb./sq. in	D638	5520
Tensile Modulus - lb./sq. in	D638	1.200.000
Tensile Elongation - %	D638	0.65
Flexural Strength - lb./sq./ in	D790	7.700
Flexural Modulus - lb./sq./ in	D790	1.200.000
Hardness - Barcol	2583	59
Hardness - Rockwell M	D785	93
Izod Impact - ft. lb./in.	D256	0.25
Specific Gravity - g/cc	D792A	1.75
Weight - lb./sq. in ½"(12,7mm) thick sheets	D792A	4.5
Liquid Absorptions (24 hrs.) -,% ½"(12,7mm) thick sheets	D570	0.04
Coeff. of Linear Expansion - in./in. ºF / mm/mm ºC	D696	2.3 X 105 / 4.14 X 105
Heat Distortion Temperature - ºF / -ºC	D648	212 / 100
Thermal Conductivity Btu. in./sq. ft. hr. ºF	D433	6.3

For a temperature change of 10ºF (-12ºC ). For example, from 70ºF to 80ºF (21ºC to 27ºC) a 10' (3.05m) length of SUNRAY Solid Surfacing material would increase less than 1/32" (0.79mm)

ASTM E-84 Test Method - Fire Resistance
All SUNRAY Solid Surfacing sheet stock is classified as class 1(a) fire-resistant material for interior finishes
Design	Thickness	Supporting Sheet	Flame Spread	Smoke Developed Index
Solid Colour	12mm	None	10	25
Granite Pattern	12mm	None	10	20

Test	Reference Standart	Rating	Specimen 1	Specimen 2
UV Exposure	Bs2662 : 1961	5 to 1	5	5

* Test cycle : 8 hours UV exposure at 55°C and 4 hours condensation at 45°C
Test condition : At 23 ± 2°C and 70 ± 15% relative humidity
** Grayscale for assessing colour change and rating 5 means no change of colour

Maintenance

ss6

Not only it is easier to cook and bake in a clean kitchen, but clean surfaces and storage containers will keep your family healthier and safer. Even though our kitchen are durable and built to last, maintaining and cleaning your kitchen periodically will keep your kitchen look brand new.

SUNRAY Solid Surface products will provide years of service with simple care. For ordinary cleaning, use a damp cloth and household detergent. Stain should be removed using a mild cleanser such as Pine-sol broad spectrum formula. More stubborn stains may be removed by rubbing gently with a Scotch-Brite brand scourpad or Scotch-Brite brand #7447 pads. More severe damage, nicks or scratches may be removed by carefully sanding the area with fine abrasive sandpaper, then finishing with Scotch-Brite brand #7447 pads to restore the finish. Very severe damage can be repaired using SUNRAY seaming compound and is best done by trained fabricator or dealer.

Eco Friendly

ss5

Natural Outlook
SUNRAY is grouped into two collections which vary from solid to natural stone, each of the collection comes in the standard dimension of 3000 x 800 x 8 mm and 3000 x 800 x 12 mm. It appears exactly like a natural stone but weighs only less than half the weight, therefore it can save the cost of freight and handling. This is why many have seen SUNRAY solid surface as a perfect material to substitute the use of natural stone.

Resistant
SUNRAY has proved itself to be a remarkably durable material. It cannot delaminate and stands up well to daily wear and tear. It resists most of the impacts, nicks and cuts that occur in heavy traffic areas. Sunray has been tested for its durability based on ANSI/NEMA Standards Publication - Ld3 - 1995 and ASTM test method.

Hygienic
SUNRAY is a non-porous material. It is solid through its entire thickness and can be fabricated with inconspicuous seams, rendering its surface hygienic. SUNRAY surfaces do not support the growth of bacteria or fungi.

Non-toxic
SUNRAY is an inert and non-toxic material. Under normal temperature conditions, it does not emit gases. When burned, it releases mainly Carbon Oxides and the smoke generated is optically light and does not contain toxic halogenated gases. Because of these properties, SUNRAY is used in private areas such as homes and public areas such as counters, work surfaces in hospitals and hotels.

Durability

ss4

SUNRAY Solid Surface is the perfect solution for kitchen countertops because it's naturally resistant to heat, mold, water and impact.

Solid Surface is non-porous and solid throughout the entire material, making it impossible for germs, bacteria and odor to penetrate; resulting in a very hygienic countertop for your everyday kitchen use.

Sunray Solid Surface is a fully synthetic material without the use of substance directly from nature. It can be easily refurbished and recycled. IDKU commitment to the environment is reflected by minimizing carbon emissions in each of SUNRAY's production process.

Resistant
SUNRAY has proved itself to be a remarkably durable material. It cannot delaminate and stands up well to daily wear and tear. It resists most of the impacts, nicks and cuts that occur in heavy traffic areas. SUNRAY has been tested for its durability based on ANSI/NEMA Standards Publication - Ld3 - 1995 and ASTM test method.

More Articles...